Functional Thin-Walled Carbon Fiber Case Studies & Components
Featured in our carbon fiber case studies, Application: High-power density Axial Flux Motors for eVTOL, Industrial Automation, Marine Electric Propulsion, and High-Performance EV Powertrains. (Non-Conductive Carbon Fiber Sleeve for Axial Flux Motor Stator Isolation)
Engineering Challenges: Traditional metallic sleeves induce significant eddy current losses, leading to thermal dissipation issues and degraded motor efficiency. Thin-wall sleeves are prone to deformation under hydraulic pressure and continuous thermal cycling (<180 °C).
Compovanta’s Value & QC Protocol:
Design & Layup: Customized ultra-thin, high-modulus carbon fiber layup combined with non-conductive, high-Tg epoxy resin, fully eliminating eddy current losses while preserving structural integrity.
Precision Machining: Tight control over wall thickness uniformity (±0.02 mm) and surface roughness to secure a leak-proof interference fit.
Quality Control: 100% hydraulic pressure leak test (>10 bar) and ultrasonic C-scan inspection to ensure zero void defects and full structural homogeneity.
Result: 60% reduction in stator sleeve weight, complete elimination of eddy current heating, alongside improved overall motor power density and thermal endurance.
High-Speed Carbon Fiber Guide Roller with Integrated Metal Journal
Application: Battery Film Coating, High-Speed Printing, and Converting Machinery.
Engineering Challenges:
High rotational speeds leading to resonance and vibration in traditional steel rollers.
Strict requirement for concentricity and dynamic balance.
Compovanta’s Value & QC Protocol:
Design & Manufacturing: Precision 3-axis carbon fiber winding for maximum bending stiffness and minimum rotational inertia.
Assembly: Engineered high-strength epoxy bonding combined with thermal expansion press-fit for metal shaft ends.
Quality Control: 100% Dynamic Balancing Test (G2.5 standard) and 3D CMM dimensional inspection before dispatch.
Result: 60% inertia reduction and 2.5x critical speed threshold, allowing clients to increase production line speed by 35%.
Custom functional prepregs
High Tg Prepreg for Automotive Heat-Generating Components. Formulated for continuously hot automotive parts. High glass transition temperature maintains stable modulus and dimensional accuracy under sustained high temperature. Low CTE and good hydrothermal resistance, no creep or softening in long-term operation. Ideal for motor housing, PTC heater base, thermal support parts of electronic control units.
Low-Temperature Resistant Prepreg. Toughened resin matrix, excellent low-temperature toughness. Withstands -40℃ extreme cold and repeated thermal cycling, preventing matrix cracking and delamination. Suitable for structural parts, battery peripheral components and exterior composite parts for vehicles in cold regions.
Silver-Plated Prepreg. Silver-coated fabric impregnated with resin, combining composite mechanical strength and outstanding electrical conductivity. Used for automotive composite heating substrates and EMI shielding of high-voltage electronic control housings. Low surface resistance, good moldability and lightweight property for automotive applications.
Start Your Composite Project
Connect with our technical team directly, or fill out the project brief to submit your engineering requirements.
- sales@compovanta.com
- 24 Initial DFM Response
© 2026 CompoVanta Composite Solutions. All Rights Reserved.